Push Back Racking systems combine high density storage with more versatility than Drive-In Racking because each lane flows independently. This system operates on the last in, first out (LIFO principle) per lane. Multiple Pallets are stored on a gravity-fed cart system, allowing retrieval of the pallets from the face of the rack.
Systems are custom designed from 2 to 6 pallets deep. Height is only restricted by the lift truck reach. Push Back Racking is normally used against a wall or in back-to-back rows.
- Existing Selective Rack and Drive-In Rack can often be retrofitted to support Push-Back lanes
- No special forklifts required
- Storage density of Drive-In rack with the individual level selectivity of one pallet rack face for each product
- Accommodates a variety of pallet sizes and types – with full frame Trolleys Carts
- Faster retrieval time – lift trucks don’t have to travel down Drive-In tunnels or secondary aisles
- Lift truck drivers never enter the rack
- Only front pallet and rack frames are exposed to lift truck impact, but can be recessed for safer forklift movement
- Low Maintenance – all wheels have sealed bearings for long life
- Ideal for Automatic retrieval Systems or incorporating into Pick Towers or Rack supported buildings.
| Performance of Racking System |
Bulk Storage |
Selective Pallet Rack |
Push Back Rack |
|
Selectivity of individual pallets |
40% |
100% |
60% |
|
Use of floor space |
80% |
50% |
70% |
|
Utilization of pallet posting |
70% |
98% |
80% |
|
Speed of access and throughput |
80% |
80% |
70% |
|
Stock rotation (FIFO) |
40% |
60% |
60% |
|
Use of building height |
30% |
80% |
70% |
|
Efficient Bottom Level Case Picker |
No |
Yes |
Yes |
|
Ease of relocation |
100% |
100% |
80% |
|
System adjustability |
100% |
100% |
100% |
|
Specialist handling equipment |
No |
No |
Check with Manufacturer |
